inglesechromedress-upplate.pdf | ng1894640.jpg

Protect your investment and improve the overall appearance of your custom Inglese™ Induction System

Dress-up and protect your carburetors with an Inglese™ Chrome Dress-Up Plate. This beautiful chrome piece adds the finishing touch to one of the most visible parts of your induction system, while at the same time covering and protecting vital carburetor areas from excessive dirt and debris.

The easy-to-install piece perfectly complements all two-barrel IDF Inglese™ Weber carburetors and stacks. The Chrome Dress-Up Plate mounts between the carburetor and stacks, covering and protecting the carburetor while adding a stylish flair. Perfect for show cars or anyone who wants to add a little more polish to their IDF carburetors, the Chrome Dress-Up Plate is classic yet functional.

For more information about the Inglese™ Chrome Dress-Up Plate or any other Inglese™ product, call us at 1-866-450-8089, or visit us online at www.inglese.com

cpgholleylsfestsponsorship.pdf

COMP Cams® is set to sponsor the Outlaw Drag Radial class at new Holley LS Fest; RHS® and TCI® to be product sponsors

COMP Cams® is proud to sponsor the popular Outlaw Drag Radial class at the inaugural Holley LS Fest in Bowling Green, Kentucky, on September 10th -12th, 2010.

During the brand new LS Fest, competitors from all over the country will meet at Beech Bend Raceway Park in order to go head-to-head to prove that they have what it takes to put down massive power on Drag Radial tires. The COMP Cams®-sponsored event will feature rules that allow a range of different combinations, so there is sure to be a wide variety of Outlaw Radial cars competing for the win.

In addition to participation from COMP Cams®, the Holley LS Fest will receive product sponsorship from RHS® and TCI®. All three CPG™ companies will have technical representatives onsite during the entire three-day event to answer questions about the latest in LS engine aftermarket technology.

The Holley LS Fest will be a celebration of anything and everything powered by a GM LS engine. Race cars, street rods, muscle cars, trucks, late models – if it’s powered by an LS engine, you’ll see it at the festival. Whether you want to participate or just watch, the drag races, autocross, 0-60-0 speed stop challenge, show-n-shine, engine swap and other events will show off the best of the best when it comes to LS-equipped vehicles.

For more information about the COMP Performance Group™ sponsorship of the Holley LS Fest or any CPG products, visit us online at www.compperformancegroup.com. For more information about the inaugural Holley LS Fest, visit http://www.holley.com/lsfest.

inglesediecastaluminumvalvecovers.pdf | ng1894640.jpg

Inglese™ unveils new line of die cast valve covers for SBC, BBC and SBF engines, finished in a Black-Wrinkle powder coat with a polished, laser-etched logo

This new line of premium die cast aluminum valve covers brings a whole new level of style and function to your engine. The sleek and durable Black-Wrinkle powder coated finish with the polished, laser-etched logo is sure to provide that performance look for which Inglese™ is known. Applications include Small Block Chevy, Big Block Chevy and Small Block Ford.

Inglese™ valve covers are a perimeter bolt style and feature breathers with laser-etched logos, two black rubber grommets and installed baffles that are welded in place to ensure no oil enters the breathers. The breathers on both valve covers allow for proper crankcase ventilation. Both stylish and functional, these covers were designed to be tall enough to provide the necessary clearance to accommodate aftermarket valve trains.

Manufactured and packaged in the U.S.A., these powder coated, die cast aluminum valve covers from Inglese™ offer a sleek, high-performance look combined with rigid durability and unmatched reliability. They are the perfect addition to any high-performance engine and will look great next to your Inglese™ induction system. Gaskets are not included.

For more information about the Inglese™ Die Cast Aluminum Valve Covers or any other Inglese™ product, call us at 1-866-450-8089, or visit us online at www.inglese.com.

ingleseez-efieight-stackinductionsystems.pdf | ez-efi.jpg

New EFI systems from the aftermarket’s foremost induction jeweler deliver the perfect combination of show-quality looks, fuel efficiency & street performance

The Inglese™ EZ-EFI® Induction Systems may look like classic Weber induction, but these technically advanced systems deliver increased performance, cold starts and drivability for your street rod, muscle car or restored classic. Additionally, they are capable of supporting engines up to 1000 hp and allow a much broader camshaft selection than a carbureted setup.

The new systems employ advanced FAST™ EZ-EFI® fuel injection and Precision-Flow™ Fuel Injectors (GM LS7-type) that are integrated into our exclusive cast aluminum 50mm IDA-style throttle bodies. The EZ-EFI® is a self learning fuel injection system that tunes itself as you drive and does not require the use of a laptop. Simply answer a few easy questions on the system’s hand-held unit. The EZ-EFI® controller will then use that information to establish the base tuning file, and then “learn” as you drive, while honing in on the optimum tune. It really is that easy. The EZ-EFI® can even be used with your existing distributor*.

Inglese™ EZ-EFI® Eight Stack Systems are designed to use custom-engineered, low-profile fuel rails that sit below the stacks and between the throttle bodies for a much cleaner look. Also featured are aircraft-quality aluminum linkages that are designed to provide smooth and trouble-free actuation. These sophisticated systems are engineered to deliver reliable service under normal heat environments and avoid the common linkage binding found with many inferior systems.

For more information about the Inglese™ EZ-EFI® Eight Stack Induction Systems or any other Inglese™ product, call us at 1-866-450-8089, or visit us online at www.inglese.com.


*EZ-EFI® does NOT have ignition control capabilities. A distributor for carbureted applications must be used. Call FAST™ or Inglese™ for a distributor recommendation.

inglesesbcvalvecoveradapterkitforgmlsengines.pdf | ng4011640.jpg | ng4011_2640.jpg

New billet aluminum kit enables mounting conventional Small Block Chevy valve covers on late model LS-based GM Gen III & Gen IV engines

In increasing numbers, hot rodders are making the switch to the reliability, performance and drivability provided by GM Gen III/IV engine packages. However, the valve cover choices for these LS engines leave much to be desired in the style department. Now thanks to the hot rodders at Inglese™ there is a simple way to add classic, show-inspired looks to your new LS engine. The all-new Small Block Chevy Valve Cover Adapter Kit from Inglese™ enables the use of traditional SBC valve covers on your new Gen III/IV LS engine.

Specifically, the billet aluminum adapters are designed to mate center bolt GM LS heads with any perimeter bolt Small Block Chevy valve covers. Give your late model engine the classy look of a traditional SBC, and further the retro look of transplanted LS engines in your muscle car or street rod. CNC-machined from billet aluminum, this kit features an o-ring channel for reuse of the stock LS valve cover seals, as well as featuring the same oil-deflecting lip on the spacer.

The kit is fully compatible with all GM LS valve train components, including large aftermarket shaft rockers and springs. Kit includes all necessary hardware. For more information about the Inglese™ Small Block Chevy Valve Cover Adapter Kit for GM LS Engines or any other Inglese™ product, call us at 1-866-450-8089, or visit us online at www.inglese.com.